logo.jpg (5008 bytes)
INBOARD PROPELLER TOOLING

 

________________________________________________________________________________________________________________

SKI BOAT PROP PULLER                                    SKIPULLER.gif (6039 bytes)
Easy to use and rigid enough to last with                       
Nibral strength.  Pulls props of 9" to 14"                       
diameter from 3/4" to 1 1/8" shafts.                               
A)  Nibral arm for strength.                                          
B)  Nut to protect shaft threads.                                   
PART NO. DMX SK1                                                  
 

Retail - $71.00 ..........A1 Price - $61.00

________________________________________________________________________________________________________________

1propeze.jpg (5008 bytes)  2middlepropeze.jpg (5008 bytes)  3endpropeze3.jpg (5008 bytes)

PROP - EZE
PART NO. Description A1 PRICE
AC 24100 1" - 4 Blade $47.00
AC 24101 1" $50.00
AC 24102 1 1/4" $58.00
AC 24103 1 3/8" $79.00
AC 24104 1 1/2" $126.00
AC 24105 1 3/4" $126.00
AC 24106 2" $126.00
AC 24107 2 1/2" $144.00
AC 24108 2 3/4" $240.00
AC 24109 3" $240.00
AC 24110 Complete set (24100-24109) comes with three carriers $1267.00
AC 24200 3/4" Folding Propeller $66.00
AC 24201 7/8" Folding Propeller $70.00
AC 24202 1" Folding Propeller $82.00
AC 24203 1 1/4" Folding Propeller $102.00
AC 24300 5 piece with carrier (24100-24104) $370.00
AC 24301 3 piece with carrier (24105-24107) $406.00
AC 24302 2 piece with carrier (24108-24109) $613.00
________________________________________________________________________________________________________________


ALGONAC PROPELLER PULLER                             wpe07565.gif (14734 bytes)
A great time-saver.  Protects the propeller, the shaft, and the
bearings.  Pulls 2, 3, and 4-blade wheels (10" to 24")           
quickly, without disturbing close coupled rudders.  Requires 
only minimum clearance between the hub and strut or stern   
bearings.                                                                          

PART NO. AC model A                                                   
     for props 10" to 24" - maximum jaw opening 7

  Model A- Retail - $413.54........A1 Price - $352.00

"                   

algonacpuller.gif (14734 bytes)
PART NO. AC model B                                                   
       for props 24" to 80" - maximum jaw opening 15" (see below)   

  Model B - Retail - $811.29.......A1 Price  - $690.00   

 

________________________________________________________________________________________________________________

SAFE-WAY PROPELLER PULLERS
Made of steel forgings and castings for maximum strength and toughness.   Zinc or cadmium
plated bolts, studs, nuts, and washers for maximum corrosion resistance.  Combination pullers
remove 2, 3, 4, and 5-blade propellers.  Four sizes to suit every popular 2 - 5 blade propeller.
Remove tight propellers safely and easily.
 wpe74005.gif (5770 bytes)                                                            wpe99786.gif (7377 bytes)
CAPACITY:  3-BLADES ONLY                                                 CAPACITY:   3-BLADES ONLY
Up to 20" propeller and 1 1/2" shaft                                                 Up to 28" propeller and 2" shaft
PART NO. WA 1                                                                           PART NO. WA 2

WA 1 - Retail - $118.00 ......A1 Price - $108.00......................................................................................WA 2 - Retail - $187.00......A1 Price - $159.00


                          
wpe59496.gif (6655 bytes)                                                                                wpe07685.gif (5300 bytes)
CAPACITY:  2, 3, 4, AND 5-BLADES                                       CAPACITY: 2, 3, 4, AND 5-BLADES
Up to 28" propeller and 2" shaft                                                       Up to 44" propeller and 3" shaft
PART NO. WA 2N                                                                        PART NO. WA 3N
 

WA 2N - Retail - $268.00 ......A1 Price - $244.00 ...........................................................................WA 3N - Retail - $448.00......A1 Price - $407.00


 wpe79942.gif (4048 bytes)
ACCESSORIES:  FOR PROPELLERS WITH                            ACCESSORIES:   FOR SMALL PROPELLERS
BLADES EXTENDING OVER THE END                                LESS THAN 14" DIAMETER
OF THE HUB                                                                                      
PART NO. WA A1 (for size 1)                                                       PART NO. WA B1 (for size 1)
                    
PART NO. WA A2 (for size 2 and 2N)                                          PART NO. WA B2 (for size 2 and 2N)
                
 

WA A2 - Retail - $36.00 ........A1 Price - $23.00 ......................................................................................WA B2 - Retail - $35.00 .....A1 Price - $33.00

WA A1 - Retail - $30.00 ... A1 Price $20.00 ......................................................................................... WA B1 - Retail - $29.00... A1 Price $19.00

________________________________________________________________________________________________________________
 

wpe78390.gif (43866 bytes)

PROPELLER SHAFT PULLER
The Algonac shaft puller is made of high quality stress-proof steel to exacting specifications of maximum protection of the shaft threads.  It operates on the jack hammer principle.  You can pull the toughest shafts with no more lost tempers, pipe wrench marks, or skinned knuckles.  Just install the proper size nut, loosen coupling set screws and proceed with the slide hammer.  The new or repaired shaft can be put into the boat by reverse procedure.  The standard puller accommodates shafts from 1" through 1 1/2".  Optional nuts for 7/8" and 1 3/4"  shaft available $86.00 each.
PART NO. MDM PS
 

MDM PS - RETAIL - $278.97 .....A1 PRICE - $238.00

________________________________________________________________________________________________________________

wpe06901.gif (19472 bytes)

STRUT BEARING PULLER
Strut bearing puller eliminates the removal of the strut from the boat or the hard pushing or sawing of the old bearing.  Just select the proper bushing and screw the old bearing out.  Reverse the procedure and pull the new bearing into place.  The puller is designed to remove and install strut bearings from 1 1/2" O.D. to  2" O.D.                                                                    
PART NO. MDM SB                                                       
 

MDM SB - RETAIL - $368.77 .......A1 PRICE - $314.00

________________________________________________________________________________________________________________________________

wpe68022.gif (16679 bytes)

TRANSMISSION COUPLING PULLER
Flange puller with 3/4" bolt.  Grey Iron.  Fits 4" to 5" overall diameter of coupling.  Designed for 4 bolts couplings.                                                                 
PART NO. BAG MCP0050                                     
PART NO. BAG MCP005BOLT                            
 

BAG MCP0050 - RETAIL - $41.40 ......A1 PRICE - $36.00

BAG MCP005BOLT

____________________________________________________________________________________________________

PACKING BOX WRENCH
Ductible iron plated.  Fits rudder ports & packing boxes.
wpe22939.gif (21146 bytes)
PART NO. OVERALL LENGTH FITS PACKING NUT & LOCK NUT RETAIL A1 PRICE
BAG PBW100 9" 1" & 1 1/8" $34.50 $26.00
BAG PBW125 9 1/4" 1 1/4" $34.50 $26.00
BAG PBW150 9 1/2" 1 3/8" & 1 1/2" $36.50 $28.00
BAG PBW200 10 1/2" 1 3/4" & 2" $42.75 $33.00
BAG PBW250 15 1/2" 2 1/4" & 2 1/2" $35.15 $27.00

________________________________________________________________________________________________________________

 

wpe32649.gif (106717 bytes)
ADJUSTABLE PACKING BOX WRENCH
 Adjusts from 1 3/4" to 3".
PART NO. ALG 24151

ALG 24151 - RETAIL - $88.00 ......A1 PRICE - $75.00

 

________________________________________________________________________________________________________________

 

MARINE HYDRAULIC PULLERS

*****PLEASE CALL FOR QUOTE ON ALL MARINE HYDRAULIC PULLERS*******


YOUR PULLER SET COMES COMPLETE AND READY FOR AN EMERGENCY.  PACKED IN A DURABLE STAINLESS STEEL CASE, EASILY STOWED UNTIL NEEDED.  YOU'LL FIND STEP BY STEP INSTRUCTIONS WITH EACH SET.

FOR: 20"-34" PROPELLER DIAMETER
         1 1/2" - 2 1/4" PROPELLER SHAFT
         2, 3, 4 AND 5 BLADED PROPELLERS
         10 TON CAPACITY
 PART NUMBER DMC 1410
FOR: 30" - 40" PROPELLER DIAMETERS
         2"-3" PROPELLER SHAFT
         2, 3, 4 AND 5 BLADED PROPELLERS
         15 TON CAPACITY
 PART NUMBER DMC 1415
FOR: 32"-50" PROPELLER DIAMETERS
         2"-5" PROPELLER SHAFTS
         2, 3, 4 AND 5 BLADED PROPELLERS
         25 TON CAPACITY
 PART NUMBER DMC 1425


 FOR: 32"-50" PROPELLER DIAMETERS
         2"-7" PROPELLER SHAFTS
         2, 3, 4 AND 5 BLADED PROPELLERS
         55 TON CAPACITY
PART NUMBER DMC 1428
 

ACCESSORIES
Size Part No.
SIX TON RAM DMC 6
TEN TON RAM DMC 10
FIFTEEN TON RAM DMC 15
TWENTY FIVE TON RAM DMC 25

STAINLESS STEEL PORTABLE RAM SHOP SETS

hydraulicpuller.gif (56679 bytes)

HYDRAULIC PRESS SHOP SET
REMOVE AND REPLACE STRUT BEARINGS 3/4" - 2 1/2" PROP SHAFT DIAMETER. PULL PROPELLERS 10"-32", 2, 3, 4 AND 5 BLADES UP TO 2 1/2" SHAFT DIAMETERS.  LEVEL ENGINES, REMOVE RUDDER QUADRANTS, COLOR CODED AND COMPLETE WITH SIX TON RAMS, ONE FIFTEEN TON RAM, HYDRAULIC HAND PUMP AND HOSE. COMPLETE KIT SHIPPED IN ITS OWN TOOL CADDY ON WHEELS.
 PART NUMBER DMC 1625
 

HYDRAULIC PRESS SHOP SET
REMOVE AND REPLACE STRUT BEARINGS 3/4" - 2" PROP SHAFT DIAMETER. PULL PROPELLERS 10"-30", 2, 3, 4 AND 5 BLADES UP TO 2" SHAFT DIAMETER.  REMOVE SHAFT COUPLINGS 7/8"-2" SHAFT DIAMETER AND LEVEL ENGINES.  INCLUDES: TWO SIX TON RAMS, ONE TEN TON RAM, HAND PUMP AND HOSE.   COMPLETELY CONTAINED IN OUR HANDY TOOL CADDY ON WHEELS.
 PART NUMBER DMC 1612
 

 

 

 

 

LARGER SETS AVAILABLE UPON REQUEST
HEAT TREATED ALLOY                 COMPLETELY PORTABLE
   PRECISION MACHINED                COLOR CODED COMPONENTS
RUGGED CONSTRUCTION                     STAINLESS STEEL RAM
FIVE YEAR WARRANTY

order.gif (1352 bytes)                                                              door.jpg (804 bytes)
Place an Order                                            Return to Index

NO RETURNS OR REFUNDS ON ANY SPECIAL ORDER

RESTOCKING FEE OF 25%

For further information contact us@
ADVANTAGE PROPELLER DISCOUNT CENTER
P.O. Box 677
Washington, Michigan 48094-0677
1-888-757-PROP (1-888-757-7767)
CLICK TO E-MAIL advantage677@sbcglobal.net

07/28/2010